Apply your solvent cements like the pro's! This liquid adhesive dispenser works best for applying ACRIFIX 1S 0107, ACRIFIX 1S 0117, and ACRIFIX 1S 2105.

• 2 ounce bottle
• 25 gauge needle  

Take the guess-work out of mixing reactive two-part cements! Use the graduated pipette to add the precise amount of ACRIFIX CA 0020 to get the best results. Just slide the gel tip onto the Graduated pipette and have an instant solvent cement applicator.

Properties:

• Polyethylene pipets

• 7 ml transfer pipet
• Graduated to 3 ml
• Bulb draw 3.2 ml
• Length 15.5 cm" 
   

Use the graduated plastic pipette with this Gel tip to apply solvent cements in the tight, hard to reach locations.

Properties:

• .6 mm OD orifice
• 68 mm long tip
• Fits most 20, 50, 100, and 200 µl pipettors
• Use with agarose or acrylamide gels

The Monoject 412 is a great tool for applying reactive cements and/or thickened solvent cements. This product is great for precise application of cement with no mess!

Properties:

• Ungraduated
• Reusable plastic finger grip extender
• Ideal for pressure irrigation

Get the bond done perfect the first time by protecting those non-cementing critical areas with the blue polyester masking tape. The tape removes without leaving an adhesive residue.

Properties:

• 1 mil thick polyester 
• 2 mil thick silicone adhesive
• Can withstand temperature up to 400°F/204°C
• Packaged in a 3"" core and is 72 yards long

This hinged, decorative business card holder is comprised exclusivley of ACRYLITE blue and colorless acrylic sheet. Ships in a satin-lined gift box.

This single edge upcut spiral O flute tool provides smooth finishes with upward chip removal.

• A high performance tool 
• Ideal for fast cutting spiral O flute geometry
• Can cut up to 1/4" acrylic (CEL)
• 1/8" cutting edge diameter (CED)
• 1/4" shank diameter (SHK)
• 2" overall length (OAL)
• For solid surface and inlay
• Can also be used for nylon, PVC & polycarbonate
• Onsrud 63-710

This single edge upcut spiral O flute tool provides smooth finishes with upward chip removal.

• A high performance tool
• Ideal for fast cutting spiral O flute geometry
• Can cut up to 1/4" acrylic (CEL)
• 1/16" cutting edge diameter (CED)
• 1/8" shank diameter (SHK)
• 2" overall length (OAL)
• For solid surface and inlay
• Can also be used for nylon, PVC & polycarbonate
• Onsrud 63-724

This single edge upcut spiral O flute tool provides smooth finishes with upward chip removal. 

• A high performance tool 
• Ideal for fast cutting spiral O flute geometry
• Can cut up to 1 1/8" acrylic (CEL) 
• 3/8" cutting edge diameter (CED)
• 3/8" Shank Diameter (SHK)
• 3" overall length (OAL)
• Can also be used for nylon, PVC & polycarbonate
  Onsrud 63-733 

This double edge upcut tool is designed to cut
ACRYLITE® acrylic sheet with a smooth finish and
upward chip flow. 

• Ideal for fast feed rates
• Can cut up to 3/4" acrylic (CEL)
• ¼" Cutting Edge Diameter (CED)
• ¼" Shank Diameter (SHK) 
• 2 ½" overall length (OAL)
• Can also be used for nylon, ABS, PE Acetal, PET,
  HDPE, UHMW, and polycarbonate
• Onsrud 52-624

This double edge upcut tool is designed to cut ACRYLITE® acrylic sheet with a smooth finish and upward chip flow.

• Ideal for fast feed rates
• Can cut up to 1 1/8" acrylic (CEL)
• 1/2" Cutting Edge Diameter (CED)
• 1/2" Shank Diameter (SHK)
• 3 ½" overall length (OAL)
• Can also be used for nylon, ABS, PE Acetal, PET,
  HDPE, UHMW, and polycarbonate
• Onsrud 52-650

This three edge upcut finisher is designed to provide perfect balance and an ultra smooth finish over a wide speed range.

• Can cut up to 5/8" acrylic (CEL)
• 3/8" Cutting Edge Diameter (CED)
• 3/8" Shank Diameter (SHK)
• 3" overall length (OAL)
• Can also be used for natural wood, composite plastic and solid surfaces
• Onsrud 60-243

This three edge upcut finisher is designed to provide perfect balance and an ultra smooth finish over a wide speed range.

• Can cut up to 1/8" acrylic (CEL)
• 1/2" Cutting Edge Diameter (CED) 
• 1/2" Shank Diameter (SHK) 
• 3 ½" overall length (OAL) 
• 10° Helix Angle
• Can also be used for natural wood, composite plastic and solid surfaces
• Onsrud 60-249