This single edge upcut spiral O flute tool provides smooth finishes with upward chip removal.

• A high performance tool 
• Ideal for fast cutting spiral O flute geometry
• Can cut up to 1/4" acrylic (CEL)
• 1/8" cutting edge diameter (CED)
• 1/4" shank diameter (SHK)
• 2" overall length (OAL)
• For solid surface and inlay
• Can also be used for nylon, PVC & polycarbonate
• Onsrud 63-710

This single edge upcut spiral O flute tool provides smooth finishes with upward chip removal.

• A high performance tool
• Ideal for fast cutting spiral O flute geometry
• Can cut up to 1/4" acrylic (CEL)
• 1/16" cutting edge diameter (CED)
• 1/8" shank diameter (SHK)
• 2" overall length (OAL)
• For solid surface and inlay
• Can also be used for nylon, PVC & polycarbonate
• Onsrud 63-724

This single edge upcut spiral O flute tool provides smooth finishes with upward chip removal. 

• A high performance tool 
• Ideal for fast cutting spiral O flute geometry
• Can cut up to 1 1/8" acrylic (CEL) 
• 3/8" cutting edge diameter (CED)
• 3/8" Shank Diameter (SHK)
• 3" overall length (OAL)
• Can also be used for nylon, PVC & polycarbonate
  Onsrud 63-733 

This double edge upcut tool is designed to cut
ACRYLITE® acrylic sheet with a smooth finish and
upward chip flow. 

• Ideal for fast feed rates
• Can cut up to 3/4" acrylic (CEL)
• ¼" Cutting Edge Diameter (CED)
• ¼" Shank Diameter (SHK) 
• 2 ½" overall length (OAL)
• Can also be used for nylon, ABS, PE Acetal, PET,
  HDPE, UHMW, and polycarbonate
• Onsrud 52-624

This double edge upcut tool is designed to cut ACRYLITE® acrylic sheet with a smooth finish and upward chip flow.

• Ideal for fast feed rates
• Can cut up to 1 1/8" acrylic (CEL)
• 1/2" Cutting Edge Diameter (CED)
• 1/2" Shank Diameter (SHK)
• 3 ½" overall length (OAL)
• Can also be used for nylon, ABS, PE Acetal, PET,
  HDPE, UHMW, and polycarbonate
• Onsrud 52-650

This three edge upcut finisher is designed to provide perfect balance and an ultra smooth finish over a wide speed range.

• Can cut up to 5/8" acrylic (CEL)
• 3/8" Cutting Edge Diameter (CED)
• 3/8" Shank Diameter (SHK)
• 3" overall length (OAL)
• Can also be used for natural wood, composite plastic and solid surfaces
• Onsrud 60-243

This three edge upcut finisher is designed to provide perfect balance and an ultra smooth finish over a wide speed range.

• Can cut up to 1/8" acrylic (CEL)
• 1/2" Cutting Edge Diameter (CED) 
• 1/2" Shank Diameter (SHK) 
• 3 ½" overall length (OAL) 
• 10° Helix Angle
• Can also be used for natural wood, composite plastic and solid surfaces
• Onsrud 60-249